Master Blaster Mobile Sandblasting Wexford

Welcome
Comments
Products & services
Photo Gallery
Location

087 1714533

Damian Tomaszewski

d.tomaszewski.ie@gmail.com

www.masterblaster.ie

Wexford, Ireland

Network

About

Master Blaster Mobile Sandblasting Wexford

Hi. My name is Damian Tomaszewski, I am 29 years old. I started my sandblasting business in july of 2021. I really enjoy sandblasting as it gives me pleasure to watch the rust, paint and ongrowth dissapear from each product we are working on. Its not just a job for me, its also a hobby. Some people find it a dirty and stressful job, for me its my dream job, i wake up with a smile on my face for another day of sandblasting. Every Customer is our number 1 priority and we will always give them the highest quality of workmanship everytime. We do everything mobile to save our customers time and money so they dont have to hire trailers to bring stuff for blasting. We are prepared for every challenge.

Services we offer as Follows:

All types of Sandblasting - priming - painting - sealing - stone cleaning - rust removal - timber restoration - paint removal

Dustless sandblasting services

Tractors- trailers - gates - garden furniture - garden sets - wheels - chairs - tables - stone - marble

Master Blaster Mobile Sandblasting is a completely mobile sandblasting, Priming/Painting team with specialist based Kilmuckridge County Wexford. We provide professional quality assured services using the latest technology and a wide variety of abrasives to get the best results for our customers.

For more information and a free quote on every job big or small, please get in touch by calling Damian on 087 1714533 or send us an email to d.tomaszewski.ie@gmail.com you can also get in touch by sending us a Dm to our Facebook page https://m.facebook.com/100409422752651/

Bulletin Board
Post comment

Bulletin Board (geoPush)

Master Blaster Mobile Sandblasting

Products & services

Dustless Blasting information as follows:

Dustless Blasting is a paint stripping and cleaning system, it is used to remove virtually any coating from any type of surface, without creating a huge amount of dust. Dustless Blasting will completely remove all the old coating, leaving a clean, like-new surface. Dustless sandblasting can even be used to texture and etch hard surfaces.

The Dustless Blaster works by mixing water and abrasive inside the blast tank. By introducing water, we’re drastically increasing mass and energy the machine is putting out, while suppressing dust, so you will not have to worry about a big mess when working with dustless blasters. we will combine the abrasive with water, leaving no dust. Dustless blasting is very like power washing. So you don't need to worry about ventilation.

Sandblasting Information

Sandblasting will effectively remove paint, rust, residue and oxidation from materials quickly and efficiently. Sandblasting could also be used for changing the condition of a metal's surface, such as through removing scratches or casting marks. Sandblasting is a fantastic cleaning method and has been used for many years.

Sandblasting is the act of propelling very fine particles of an abrasive material at high velocity toward a surface in order to clean or etch it. Sandblasting is often used as a way to prepare a surface prior to painting. It is commonly used to strip paint from machinery and metal, but it has many other uses as well.

If you would like to know anymore information on our services, don't hesitate by getting in touch with us on 087 1714533 or email us at d.tomaszewski.ie@gmail.com you can also get in touch with us through our Facebook page https://m.facebook.com/100409422752651/

Products & services

Priming after the blasting process

All objects that are prepared must be primed within 24-hours of the time after blast cleaning was initiated. All objects blast cleaned during the work shift must be primed within that same work shift. Prepared objects not protected within the same work shift will have to be re-blast cleaned prior to coating. We use 2 part epoxy primer zinc based, this gives good protection against rust and also a great surface for the paint to adhere too.

Painting after sandblasting

The object must be thoroughly cleaned to remove all traces of dirt and grease as well as residual traces of sand that will interfere with the paint. standard that coating takes place no more than 4 hours after completing the blasting process. But time only plays a part in that. The surface and environmental conditions should also be considered. How quickly your paint dries if the conditions for coating are not adequate. We offer top coat of 2 part paint with colour of our customers choice.

The sealing process after blasting

The best way to seal an object after sandblasting is to apply a coating to the surface and seal it up. If you’re done doing metal work and are ready to paint or do body filler you can first seal the metal up with a good primer or what we use is a UV and moisture resistant stone and wood sealer.

If you have any questions on any of our services or would like to know anymore information, then get in touch by calling 087 1714533 or email us at d.tomaszewski.ie@gmail.com for an no obligation quote, you can also get in touch with us through our Facebook page https://m.facebook.com/100409422752651

Products & services

Photo Gallery

...
ID: 2032
Order: 2031
State: 1
N/A: 0
N/A: 0000-00-00 00:00:00
Created by: 3553
Name: Master Blaster Mobile Sandblasting Wexford
Alias: masterblaster
Category: Construction
Address:
ZipCode:
City: Wexford
Province:
Country: IRL
Lat: 52.3325
Lng: -6.49049
Telephone:
Telephone 2:
Fax:
MobilePhone:
Mobile Phone 2:
Email:
Website: /masterblaster
Facebook:
Twitter:
Intro Text:
Description:
Logo: images/sobipro/entries/1238/profile/thumb_received_1187806668429003.jpeg
Icon:
Picture:
Gallery:

Products

object(stdClass)#12311 (9) {
  ["1"]=>
  object(stdClass)#12313 (2) {
    ["text"]=>
    object(stdClass)#12314 (4) {
      ["data"]=>
      string(1961) "Dustless Blasting information as follows:
Dustless Blasting is a paint stripping and cleaning system, it is used to remove virtually any coating from any type of surface, without creating a huge amount of dust. Dustless Blasting will completely remove all the old coating, leaving a clean, like-new surface. Dustless sandblasting can even be used to texture and etch hard surfaces.
The Dustless Blaster works by mixing water and abrasive inside the blast tank. By introducing water, we’re drastically increasing mass and energy the machine is putting out, while suppressing dust, so you will not have to worry about a big mess when working with dustless blasters. we will combine the abrasive with water, leaving no dust. Dustless blasting is very like power washing. So you don't need to worry about ventilation.
Sandblasting Information 
Sandblasting will effectively remove paint, rust, residue and oxidation from materials quickly and efficiently. Sandblasting could also be used for changing the condition of a metal's surface, such as through removing scratches or casting marks. Sandblasting is a fantastic cleaning method and  has been used for many years.
Sandblasting is the act of propelling very fine particles of an abrasive material at high velocity toward a surface in order to clean or etch it. Sandblasting is often used as a way to prepare a surface prior to painting. It is commonly used to strip paint from machinery and metal, but it has many other uses as well.
If you would like to know anymore information on our services, don't hesitate by getting in touch with us on 087 1714533 or email us at d.tomaszewski.ie@gmail.com you can also get in touch with us through our Facebook page https://m.facebook.com/100409422752651/"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(8) "textarea"
      ["cssClass"]=>
      string(0) ""
    }
    ["img"]=>
    object(stdClass)#12312 (4) {
      ["data"]=>
      string(65) "images/sobipro/entries/1238/one/img_received_457546772464418.jpeg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(15) "productImgRight"
    }
  }
  ["2"]=>
  object(stdClass)#12309 (2) {
    ["text"]=>
    object(stdClass)#12310 (4) {
      ["data"]=>
      string(1865) "Priming after the blasting process
All objects that are prepared must be primed within 24-hours of the time after blast cleaning was initiated. All objects blast cleaned during the work shift must be primed within that same work shift. Prepared objects not protected within the same work shift will have to be re-blast cleaned prior to coating. We use 2 part epoxy primer zinc based, this gives good protection against rust and also a great surface for the paint to adhere too.
Painting after sandblasting 
The object must be thoroughly cleaned to remove all traces of dirt and grease as well as residual traces of sand that will interfere with the paint. standard that coating takes place no more than 4 hours after completing the blasting process. But time only plays a part in that. The surface and environmental conditions should also be considered. How quickly your paint dries if the conditions for coating are not adequate. We offer top coat of 2 part paint with colour of our customers choice.
The sealing process after blasting 
The best way to seal an object after sandblasting is to apply a coating to the surface and seal it up. If you’re done doing metal work and are ready to paint or do body filler you can first seal the metal up with a good primer or what we use is a UV and moisture resistant stone and wood sealer.
If you have any questions on any of our services or would like to know anymore information, then get in touch by calling 087 1714533 or email us at d.tomaszewski.ie@gmail.com for an no obligation quote, you can also get in touch with us through our Facebook page https://m.facebook.com/100409422752651"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(8) "textarea"
      ["cssClass"]=>
      string(0) ""
    }
    ["img"]=>
    object(stdClass)#12308 (4) {
      ["data"]=>
      string(65) "images/sobipro/entries/1238/two/img_received_764827348049926.jpeg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(14) "productImgLeft"
    }
  }
  ["3"]=>
  object(stdClass)#12306 (1) {
    ["img"]=>
    object(stdClass)#12307 (4) {
      ["data"]=>
      string(68) "images/sobipro/entries/1238/three/img_received_1187806668429003.jpeg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(15) "productImgRight"
    }
  }
  ["4"]=>
  object(stdClass)#12304 (1) {
    ["img"]=>
    object(stdClass)#12305 (4) {
      ["data"]=>
      string(61) "images/sobipro/entries/1238/four/img_FB_IMG_1657845174017.jpg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(14) "productImgLeft"
    }
  }
  ["5"]=>
  object(stdClass)#12302 (1) {
    ["img"]=>
    object(stdClass)#12303 (4) {
      ["data"]=>
      string(66) "images/sobipro/entries/1238/five/img_received_590416919310029.jpeg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(15) "productImgRight"
    }
  }
  ["6"]=>
  object(stdClass)#12300 (1) {
    ["img"]=>
    object(stdClass)#12301 (4) {
      ["data"]=>
      string(65) "images/sobipro/entries/1238/six/img_received_443074717660057.jpeg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(14) "productImgLeft"
    }
  }
  ["7"]=>
  object(stdClass)#12298 (1) {
    ["img"]=>
    object(stdClass)#12299 (4) {
      ["data"]=>
      string(67) "images/sobipro/entries/1238/seven/img_received_732026881407588.jpeg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(15) "productImgRight"
    }
  }
  ["8"]=>
  object(stdClass)#12296 (1) {
    ["img"]=>
    object(stdClass)#12297 (4) {
      ["data"]=>
      string(67) "images/sobipro/entries/1238/eight/img_received_574068247782177.jpeg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(14) "productImgLeft"
    }
  }
  ["9"]=>
  object(stdClass)#12294 (1) {
    ["img"]=>
    object(stdClass)#12295 (4) {
      ["data"]=>
      string(67) "images/sobipro/entries/1238/nine/img_received_1289612748237751.jpeg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(15) "productImgRight"
    }
  }
}

Gallery

object(stdClass)#12291 (9) {
  ["1"]=>
  object(stdClass)#12292 (1) {
    ["image"]=>
    object(stdClass)#12293 (4) {
      ["data"]=>
      string(63) "images/sobipro/entries/1238/galone/img_FB_IMG_1658141278630.jpg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(0) ""
    }
  }
  ["2"]=>
  object(stdClass)#12289 (1) {
    ["image"]=>
    object(stdClass)#12290 (4) {
      ["data"]=>
      string(68) "images/sobipro/entries/1238/galtwo/img_received_609820660451905.jpeg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(0) ""
    }
  }
  ["3"]=>
  object(stdClass)#12287 (1) {
    ["image"]=>
    object(stdClass)#12288 (4) {
      ["data"]=>
      string(71) "images/sobipro/entries/1238/galthree/img_received_1289612748237751.jpeg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(0) ""
    }
  }
  ["4"]=>
  object(stdClass)#12285 (1) {
    ["image"]=>
    object(stdClass)#12286 (4) {
      ["data"]=>
      string(70) "images/sobipro/entries/1238/galfour/img_received_1106766059920388.jpeg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(0) ""
    }
  }
  ["5"]=>
  object(stdClass)#12283 (1) {
    ["image"]=>
    object(stdClass)#12284 (4) {
      ["data"]=>
      string(69) "images/sobipro/entries/1238/galfive/img_received_456738453125103.jpeg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(0) ""
    }
  }
  ["6"]=>
  object(stdClass)#12281 (1) {
    ["image"]=>
    object(stdClass)#12282 (4) {
      ["data"]=>
      string(68) "images/sobipro/entries/1238/galsix/img_received_391937186367679.jpeg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(0) ""
    }
  }
  ["7"]=>
  object(stdClass)#12279 (1) {
    ["image"]=>
    object(stdClass)#12280 (4) {
      ["data"]=>
      string(65) "images/sobipro/entries/1238/galseven/img_FB_IMG_1657797658985.jpg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(0) ""
    }
  }
  ["8"]=>
  object(stdClass)#12277 (1) {
    ["image"]=>
    object(stdClass)#12278 (4) {
      ["data"]=>
      string(70) "images/sobipro/entries/1238/galeight/img_received_990274428312317.jpeg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(0) ""
    }
  }
  ["9"]=>
  object(stdClass)#12275 (1) {
    ["image"]=>
    object(stdClass)#12276 (4) {
      ["data"]=>
      string(69) "images/sobipro/entries/1238/galnine/img_received_764827348049926.jpeg"
      ["withLabel"]=>
      string(1) "1"
      ["fieldType"]=>
      string(5) "image"
      ["cssClass"]=>
      string(0) ""
    }
  }
}

Master Blaster Mobile Sandblasting Wexford

About

Bulletin Board Post comment

Bulletin Board (geoPush)

Products & services

Products & services

Products & services

Products & services

Products & services

Products & services

Products & services

Products & services

Products & services

Photo Gallery

Products

Gallery

Login mobile

Bulletin Board
Post comment